VersEseal Water Tank Sealant

Potable Water Approved Tank Waterproofing

Is your water tank plagued by relentless leaks? Don’t let your valuable water supply go to waste! Trust in the strength of VersEseal Liquid Rubber membrane to keep your water tanks tightly sealed, giving you peace of mind.

VersEseal has established itself as the reliable water tank lining solution for water reservoirs throughout Australia, guaranteeing the integrity of the water supply infrastructure. Rest assured, VersEseal has been rigorously tested and approved to meet AS 4020 standard for safe potable water. Use the product the professionals use and experience peace of mind and effective waterproofing for all your water tank needs with VersEseal.

Play Video

About our Water Tank Sealer

VersEseal Liquid Rubber membrane is an exceptional solution for effectively sealing water tanks. It offers a high-quality, flexible, and durable protective layer that ensures long-lasting waterproofing and prevents leaks or seepage. One notable advantage of VersEseal is its compliance with the AS4020 standard, which certifies its suitability for use in applications involving drinking water. This approval guarantees that the membrane is non-toxic, ensuring the water’s purity and making it a reliable choice for sealing water tanks intended for potable water storage. With VersEseal Liquid Rubber membrane, you can have peace of mind knowing that your water tanks are securely sealed, protecting both the water source and the environment.

Superior Durability and Compatibility for Water Tank Lining

VersEseal is a highly durable and versatile sealant that proves to be an excellent choice for sealing both concrete and metal drinking water tanks. Its remarkable durability ensures long-lasting protection against leaks, cracks, and corrosion, maintaining the integrity of the tanks over time. VersEseal's compatibility with various materials, including concrete and metal, makes it suitable for a wide range of applications. It adheres firmly to the surfaces, creating a tight and secure seal that prevents any water seepage or contamination. Whether used in concrete tanks or metal tanks, VersEseal offers exceptional reliability, ensuring the safety and quality of the stored drinking water.

Water Tank Paint on Sealant for a Seamless Repair

VersEseal is an exceptional water tank paint on sealant that provides outstanding effectiveness and ease of application for both concrete and metal drinking water tank repair. Widely embraced by both professionals and DIY applicators due to its easy application by brush, roller or for large projects, airless sprayer. VersEseal creates a robust and long-lasting barrier, effectively preventing water leakage and contamination. Its versatility and reliability make it an ideal choice for sealing and safeguarding drinking water tanks while also providing a durable finish.

Australian Made Excellence in Tank Waterproofing

VersEseal is a premium water tank sealant that proudly carries the label of being Australian Made. It is a product of superior quality that not only meets but surpasses industry standards. VersEseal sets itself apart by being VOC (Volatile Organic Compounds) free, ensuring a safer and healthier environment for users. Additionally, it holds the esteemed potable water approval to AS 4020, guaranteeing its compatibility for use in contact with drinking water. This remarkable waterproofing solution is manufactured in an ISO 9001 quality assured facility, ensuring strict adherence to international standards and delivering consistent excellence. VersEseal is the number one choice for all your tank waterproofing needs.

VersEseal is suitable for many tank waterproofing applications including the following:

Tank sealant applications for leaking tank repairs: VersEseal is highly effective in sealing leaks in water tanks, preventing further damage and ensuring proper functionality.

  • Metal tank repairs:
    VersEseal provides excellent adhesion as a metal water tank sealer, providing a reliable and durable solution.
  • Rainwater tank repairs:
    VersEseal is suitable for sealing leaks and cracks in rainwater tanks, allowing for efficient collection and storage of rainwater resources.
  • Slimline tank repairs:
    VersEseal is the ideal choice for repairing slimline tanks, ensuring their watertightness and preventing water loss.
  • Poly tank repairs:
    VersEseal can effectively seal poly tanks, offering a long-lasting solution for repairing any leaks or damages.
  • Concrete tank repairs:
    VersEseal is designed to bond with concrete surfaces, making it an excellent option for use as a concrete water tank sealant to prevent water seepage.
  • Water tank refurbishment:
    VersEseal can be used to revitalize and restore the functionality of aging or deteriorating water tanks, extending their lifespan.
  • Reservoir repair:
    VersEseal is suitable for repairing reservoirs, addressing any leaks or damages and ensuring the proper containment of water resources.
  • New reservoirs:
    VersEseal can be applied during the construction of new reservoirs, providing a robust and reliable seal to prevent water leakage.
  • Liquid containment systems:
    VersEseal’s exceptional sealing properties make it suitable for various liquid containment systems, such as ponds or industrial tanks, guaranteeing a secure and leak-free environment.
  • Potable water applications:
    VersEseal is safe for use in potable water applications, making it ideal for sealing tanks used to store drinking water, ensuring water purity and safety.
  • Irrigation channels:
    VersEseal is recommended for sealing irrigation channels, offering a dependable solution to maintain efficient water distribution systems, minimising water loss and ensuring proper irrigation.

How to Seal a Concrete Water Tank

VersEseal Rapid Build is water based however, gloves, eye protections and overalls are recommended. Please read the full Safety Data Sheet before use.

1. Remove any old, failed sealant with a scraper, if possible. If it can’t be removed, treat the area like a gap and reinforce with geofabric as below.

2. Wash down to remove all dirt, dust and grime. A pressure washer is ideal for this. Allow to dry. The surface must have less then 10% moisture before proceeding.

3. Prepare Geofabric to reinforce along joins, around penetrations and over old sealant. It is much easier to pre-cut geofabric to size before starting to coat the membrane.

4. Brush the first coat of VersEseal Rapid Build liquid rubber over areas that need repair or additional reinforcement. Aim for a good thick coating of at least 1mm. Remember, you’re waterproofing, not painting – thick is good!

5. Lay geofabric bandage into the wet coating over joins and around penetrations. Ensure it is smooth with no creases or air pockets. You may need to cut a nick to allow the bandage to neatly conform to any corners or bends. If the fabric overlaps, paint some VersEseal Rapid Build liquid rubber between the layers to glue it together.

6. Immediately brush a second coat of VersEseal Rapid Build liquid rubber aiming again for another good thick coating of at least 1mm to give a wet on wet sandwich with a total wet coating thickness of 2mm.

7. Allow the repaired area to dry. This will typically take about 4 hours at 25℃ with good ventilation.

8. The final sealing step will depend on the condition of your tank.

  • ENTIRE TANK – Apply two generous coats of VersEseal Rapid Build liquid rubber over the entire tank to achieve a final Dry Film Thickness (DFT) of 0.6mm over the main tank area and 2mm over joints and repaired areas. Apply the first coat North-South and the second coat East-West. Allow to dry for at least 24hrs between coats of VersEseal Rapid Build Membrane. After final coat of VersEseal Rapid Build Membrane, allow to dry for 5-7 days – assuming good drying conditions of 25℃ and good ventilation.
  • REPAIR ONLY – If your tank is sound apart from the areas that have been repaired: Apply a third good thick coat of VersEseal Rapid Build liquid rubber over the repaired areas, to achieve a final Dry Film Thickness (DFT) of 2mm and allow to dry, allow to dry for 5-7 days – assuming good drying conditions of 25℃ and good ventilation.

 

9. If conditions are not optimal a longer drying time will be required – actual times will vary depending on season and location. If you are unsure or would like further guidance on this please give us a call.

VersEseal Rapid Build should be applied at a minimum total wet coating of 1kg/m2. Ensure this correct coating thickness is achieved to provide longevity.

Do not use this water based VOC Free coating system if rain or heavy dew are expected within 24hours. Apply at temperatures between 10℃ and 30℃. Avoid applying during the hottest part of the day.

For Cleaning up, use mineral turpentine to clean VersEseal Rapid Build from hard surfaces, use Baby Oil (Mineral oil) to clean from skin. Verseseal Top Coat can be cleaned with water.

For the full application guide please click here.

If you have any questions at any stage of your water tank sealant project, please don’t hesitate to give us a call for tips and advice!
Ph: 1300 891 576

Tank Sealing Products

VersEseal is the ultimate solution for a wide range of water tank sealing applications. Whether it’s repairing leaking tanks, fixing metal tanks, or refurbishing water tanks, VersEseal has proven to be highly effective.

FAQ's

The amount of VersEseal needed for your water tank sealing project depends on the surface area you need to cover. As a general guideline, it is recommended to use a minimum of 1 kilogram (kg) of VersEseal per square meter (m²) of surface area. This ensures proper coverage and an effective seal. However, please note that the specific requirements may vary based on factors such as the condition of the tank, the thickness of the application, and the extent of repairs needed. It is always advisable to give us a call to discuss your specific project requirements.

Yes, VersEseal is suitable for repairing a wide range of water tanks, including metal tanks, rainwater tanks, slimline tanks, poly tanks, and concrete tanks.

Yes, VersEseal is suitable for potable water applications and meets the requirements of Australian Standard AS4020 for products in contact with drinking water. AS4020 sets the guidelines for the testing and certification of products that come into contact with drinking water to ensure they do not impart any harmful substances or affect water quality.

VersEseal has undergone rigorous testing and has obtained certification confirming its suitability for use in potable water applications. It has been evaluated for its impact on the taste, odour, and chemical composition of the water, as well as its resistance to bacterial growth and leaching of harmful substances.

The certification ensures that VersEseal does not introduce any contaminants or compromise the safety and quality of the water stored in tanks or consumed by individuals.

When using VersEseal for potable water applications, it is essential to follow the manufacturer’s instructions and guidelines for proper application and curing. Adhering to these instructions will ensure that the VersEseal forms a reliable seal and maintains water quality standards.

For further advice about your Tank Waterproofing project, please get in touch using the form below or Give us a call on 1300 891 576

Copyright 2023 LRM Products Pty Ltd Website By Apex Digital